Harley Touring 23″ Wheel Bolt On Rake Kit for the Shorter Rider

bolt on 23 inch front wheel neck triple tree kit harley baggerHere is the perfect solution for a 23″ front wheel on your custom bagger. We now have available a bolt on rake kit to allow use of a big 23 Inch front wheel while keeping your bike low. Adding a 23″ wheel with just raked trees will get your geometry safe and handling well but keeps the front end of your bike high. For riders with a shorter inseam this creates problems. The bike being too tall keeps riders feet from touching the ground making these large heavy bikes hard to move around especially on uneven surfaces!

23 bolt on rake neck kit harley baggerBolt on Neck rake kit for 23 inch front wheel custom harley bagger touring triple tree streetglide roadglide road king electra glide

With this new bolt on neck and triple trees kit you can now keep your front end low with the 23″ front wheel and also get a nice balanced raked look without the need to cut your frame! This kit bolts on, looks great, keeps the long low stance you are looking for and sets the geometry up at safe numbers creating a comfortable ride!

23 Inch Wheel Bolt On Rake Kit Triple Trees Streetglide Roadglide Road King

This kit is available for 2009-2013 Harley Touring Strretglide, Roadglide, Electraglide, Road King Models. Also check out our kits and parts to go with the set up like 23″ front fender and custom wheels.

Give us a call ay 941-953-4423 or email Robert@roaringtoyz.com

 


Under Construction Again Custom 30 Inch Wheel Streetglide

Custom Streetglide Upper Fairng Headlight Open Primary Drop Seat Front Rear Air Ride

This custom 2010 Harley Davidson Streetglide is under construction once again. Although you may not have had a chance to see this bike as we have not posted many pictures or run it through a magazine yet we have it torn down to the frame once again for more work. Thought we would take a few minutes to show some before pics and run through a quick list of work before we tore it back down.

Custom Harley Streetglide 30 Inch Front Wheel Raked Trees Neck Stretched SaddlebagsCustom Harley Streetglide Bagger Green Carbon Paint Raked Neck Trees 30 Inch Wheel

The coolest things on this bike is the one off custom cut 30 Inch front wheel and rotors. The bike was painted and the front wheel was cut to match our customer’s McLaren MP4-12C High Performance Sports Car.  The bike was painted Verde Ithaca Green with Carbon graphics to match the green and carbon running throughout his car.

Custom Headlight Streetglide Upper Fairng Outer Roaring Toyz Batwing 30 Inch Front Fender FiberglassCustom Streetglide Drop Seat Kit Roaring Toyz Billet Floorboards Carbon Motor Details

This bike has a long list of custom parts including raked frame and billet raked triple trees to set the geometry correct for the 30 inch custom wheel. The entire body kit is custom with Roaring Toyz Custom Headlight Upper Fairing, Ipod Mini Inner Fairing Holding 2 6″ speakers, RT 30″ Wrap Front Fender, Driop Seat Body Kit Tank and Side Covers, RT Low Profile Custom Dash, Extra Extended Saddlebags and Rear Fender, RT Custom 6 Speaker Saddlebags Lids and a Chopped Rear Tour Pak. The stereo system runs from an Ipad mini and has a Kenwood deck running to a host of Rockford Fosgate Amps powering 12 speakers giving this bike a sound as loud as its presence! Air, ride, ape hangers, open primary, billet engine covers, exhaust and tuning are just a few of the other tricks up this Streetglides sleeve. Watch for a new feature on this bike after we rebuild it to a nicer more extreme stance!!

For any custom parts or to have your bike built give us a call at 941-953-4423!!


Custom Parts for the New Kawasaki Ninja H2

2015 Kawasaki Ninja H2Kawasaki has announced a new for 2015 model motorcycle they are calling the Ninja H2. Kawasaki is keeping the details pretty well guarded, but it has confirmed that the new H2 will debut at the Intermot motorcycle show in Cologne, Germany, on September 30. Kawasaki also stated the 2015 Ninja H2 is a collaborative effort between its other divisions, from aerospace to watercraft and the gas turbines used in its high-powered jet ski. The company released a teaser video showing a sportbike-styled windscreen and tail section along with a glimpse of a sporty tank, but what engine will power the H2 remains up to speculation.

As always Roaring Toyz will build custom aftermarket parts for the 2015 Kawasaki Ninja H2. We plan to make all the usual suspects like extended swingarm, 240, 300 and 330 wide tire swingarm kit, custom wheels, lowering links, license plate brackets, mirrors, grips, caps, covers, clutch cover, tons of billet custom parts, exhausts, performance and appearance mods to make the new Ninja H2 run and look better than factory.

Keep an eye on our site and watch for new parts in our webstore at http://www.buynowroaringtoyz.com/Kawasaki_Ninja_H2_2015_s/1180.htm


2014 Harley Streetglide gets Custom 23 Inch Front Wheel Kit, Apehangers, Forks and More!

2014 Streetglide FLHX Custom 23 inch front wheel raked triple trees bolt onAs our customers mature they are moving over to cruiser motorcycles and this bike here is the product of just that! Chris DeRosa a previous customer owning fat tire custom sportbikes we built him in the past called and said he has a new project for us. A 2014 Harley Davidson Streetglide FLHX. Chris knew he wanted to step up the size on the front wheel and decided a 23″ was a quick simple way to go. Using our 23″ front wheel kit which includes a 23″ front wheel, tire, raked triple trees and a 23″ front fender to accomplish his goal.

2014 Street Glide Billet Fork Legs Lowers Fork Covers Boots Cow Bells Contrast Cut2014 Streetglide Custom 23 Wheels Tire Big Raked Floorboards Bars Forks BilletA chrome plated Performance Machine Revel 23 Inch front wheel was selected and matching rotors were bolted to it for that chrome finished look. The wheel was mounted with an Avon Venom tire and covered by a DEI 23″ Wrap style front fender. Billet Raked triple trees were added so that the trail number remains correct keeping the bike handling nice with the taller 23″ front wheel. When doing 23, 26 and 30 inch front wheel conversion there is never a better time to dress up the forks on your bike. Since the front end was already apart Chris decided to clean up the front end by having us add billet hidden axle front fork legs and custom fork covers in black anodized contrast cut finish. If you are going to do up your front end consider doing these at the same time to save on labor costs!

2014 Streetglide FLHX Custom 23 inch front wheel raked triple trees bolt on2014 Street Glide 12 Inch Apehanger Custom Handlebars Black FLHX

Of course the rear end had to be completed with the addition of a Performance Machine Revel Chrome wheel wrapped in an Avon Venom 200 tire to match the front. A custom exhaust with machined contrast cut tips was added to give the glide a stronger sound matching the new looks!

2014 Streetglide FLHX 12 Inch Ape Hanger Handlebars Bars Painted Inner Fairing Custom2014 Streetglide Harley Davidson Custom Wheels Forks Bars Paint Floorboards

 

No Bagger is complete without a set of apehanger handlebars. The new 2104 model touring bikes need a special bend to get out of the fairing. We have just the trick with our 12″ Apehanger bars bent right for the 2014 Streetglide and Electraglide bat wing farings. The bars are finished in gloss black powdercoat and can also be ordered in different lengths. We are working on kits now to include the wiring and cables to make a complete handlebar package so give us a call! While the front was apart we had to add a painted inner fairing to match the body color on this 14 SG. Custom grips and mirrors finish off the bars on this bad boy!

Give us a call to have us build your Streetglide project or to have us help provide to the premium quality parts to no only make you look good but to perform well!

Roaring Toyz  941-953-4423     or email at  Robert@roaringtoyz.com


Kawasaki ZX14 ZX14R Billet Quick Access Clutch Covers Now Available

Dragrace clutch cover billet quick access racing zx14 zx14r zx1400Roaring Toyz is proud to announce our latest Kawasaki Ninja ZX14 product. A billet quick access clutch cover. This cover allows fast easy clutch inspections without the need to drain your oil. CNC Machined here in house in the USA from T6 6061 Billet aluminum. We black anodize the cover then remachine it adding a show quality look to the race parts.

Kawasaki Ninja ZX14 ZX14R quick release access dragrace engine clutch coverKawasaki Ninja ZX14 ZX14R ZX-14 Billet clutch Cover dragrace racing

This cover was designed for motorcycle dragracing purpose. With just three simple socket head caps screws you can quickly remove the o-ring sealed lid to expose your clutch. This allows you to work on your clutch or even just point a fan in there for cooling before passes. The lid is deep enough to house any lock up clutch available so buy with confidence.

ZX14 quick access clutch cover engine racingKawasaki Ninja ZX14 custom billet racing quick access clutch cover release

CNC machined from T6 Billet Aluminum

Made In USA

Comes with Stainless Steel Mounting Hardware

Large OEM Size Oil Fill Hole for Easy Oil Fills

Billet Oil Sight Glass Window

Black Anodized and Remachined for Show Finish

Strong to save engine in case of problems

Give us a cll or email with any questions at 941-953-4423   or email: Robert@roaringtoyz.com


Custom Harley Davidson Roadglide For Sale 26 Inch Front Wheel Stretched Everything! $24999

Harley Roadglide 2003 Custom 26 Inch Front Wheel

Just finished we built this custom RG to sell and it is now ready to go to a good home for only $24999. This bike came to us as a stock anniversary 2003 Roadglide and we have completely rebuilt it into a badass sled ready to roll the streets in style.

Harley Raked Roadglide Bagger Frame Neck Triple Trees 26 Inch Wheel Kit Body StrecthedHarley Custom Touring Stretched bags Tank Side Covers Streetglide Roadglide Electraglide 6 Inch

We stretched and raked the frame on this bike to accommodate the Performance Machine Revel Platinum Finish 26×3.5″ front wheel. The wheel has PM Contrast Cut brake rotors bolted to it and is covered up by our Classic Style 26 Inch Front Fender. Our fender is built using the highest quality fiberglass materials and offers strength better than even steel fenders while keeping weight down on the large fender. Another added benefit of our FL fender is the brackets are built into the side so no extra parts are required and bolting direct to the legs is a breeze!

Harley Custom Bagger 26 Inch Front Wheel RakedCustom Harley touring Floorboards Shifters Levers Air CleanerOur Roaring Toyz Billet Pin Stripe Series Driver and Passenger floorboards were added along with custom rear brake pedal and foot shift lever to dress up where your feet will stay! A custom Roaring Toyz Intake breather increases air flow while a Vance & Hines big radius exhaust system lets the gases out.

Custom Harley Roadglide Stretched saddlebags side covers gas tankHarley Streetglide Roadglide Road King 6 Inch Stretched Saddlebags Rear Fender

The entire body was replaced with custom parts from front to back including a trick body kit with stretched gas tank covers and flared extended side covers, stretched 6 inch extended saddlebags, extended rear fender and custom windshield. The body was all fitted up nice taking the time to set all the gaps correct and make sure all was lined up proper before spraying a custom Candy Orange and Black custom paint scheme over the bike. Candy orange was also sprayed over the black to get a special effect in the sun.

A ton of other cool parts and work were added to this bike to make it a great custom bagger ready to turn heads and create attention everywhere it rolls! All the work has been just finished and with only 200 miles since completion this is a fresh custom ready for its new home. Give us a call for more details! We will accept trades also so give us a shout with your ideas! Take this one home or give us a call to build yours!  Or if you already own one and want the parts to customize your motorcycle let us know we are here to help!

Call Roaring Toyz at 941-953-4423    or email     Robert@roaringtoyz.com

You can also see more of this bike at Custom Roadglide Video


NEW PRODUCT Pin Stripe Billet Front Brake Reservoir Covers for 08-13 Harley Touring Models

Brake Reservoir CapsIf you own a 2008-2013 Harley Davidson Touring bike chances are your front brake master cylinder lid has peeling paint. We have now come up with a great repair for this problem. Our awesome Pin Stripe Series has been successful and we have now added to it with this new Reservoir cover. A quick simple bolt on part that looks better than factory and will be right there in front of your face every time you throw a leg over your bike.

Our new cap is machined in house right here in the USA. Made from aircraft grade 6061 billet aluminum our cap is CNC machined to the tightest tolerances. We offer two finishes Show Quality Triple Chrome Plated with a lifetime warranty or Black Anodized and contrast cut with our sexy pin stripes. Stainless steel mounting hardware is included to add that finished touch!

HDRCB08B Reservoir Cap Harley Touring 08-13 Brembo Black Ano WEBHDRCB08CH 08-13 Harley Touring Bagger Brake Reservoir Cap Cover Chrome Pin Stripe WEB

This part will stand alone and look great or looks even better with our matching Pin Stripe Clutch and Brake Levers, Ignition Switch Cover, Driver Floorboards and Rear Passenger Floorboards.

HDLV08B Harley Billet Custom Clutch Brake Levers Street Road King Glide Electra Ultra Classic 08-UpHarley-Custom-Bagger-Ignition-Cover-Black-Contrast-CutFloorboards-Harley-Bagger-Custom-Billet-Pin-Stripe-Contrast-BlackHarley Touring Billet Custom Rear Floorboards Pin Stripe Chrome

These Custom Front Brake Reservoir Lids fit all 08-13 Harley Bagger Models with Factory Brembo Mater Cylinder ex. Streetglide, Roadglide, Road King, Electraglide, Electraglide Ultra Classic, CVO, Triglide etc.

Order through our webstore here http://www.buynowroaringtoyz.com/Brake_Reservoir_Caps_Harley_Bagger_s/1179.htm  or give us a call at 941-953-4423


Custom Hayabusa with Roaring Toyz “Slim Fat” Treatment 300 Tire Single Sided Swingarm & GSXR 1000 Tail Conversion

Custom White Hayabusa 300 Wide Tre SSS +4 Over Black Anodized GSXR 1000 Tail Conversion Kit

This 2009 Suzuki Hayabusa was brought to us by one of our good customers who knew he wanted a cool fat tire custom that not only looked good but rode and handled great. With our 15 years in business, background in racing and building custom motorcycles we were able to deliver exactly what he wanted.

2012 Suzuki Hayabusa Custom GSXR Tail 4 Inch Over Single Sided Swingarm 300 Raer Wide Tire KitCustom Hayabusa with Roaring Toyz Outside Drive OSD 300 Tire Single Sided Swingarm Kit 4 Inches Over Stock

We call what we did to this bike the ‘Slim Fat’ treatment. We added our Roaring Toyz +4″ Over 300 OSD Wide Tire Billet Single Sided Swingarm with Performance Machine Paramount Platinum Finish wheels. The swingarm was polished then black anodized with our RT kanji logo contrast cut into the top. The 17×3.5 front and 18×10.5 rear wheel are PM’s BMP finish which are polished, anodized, contrast cut and after the cuts are polished to a show finish. This kit is the highest quality available and is absolute motorcycle jewelry!

300 Fat Wide Tire Single Sided Swingarm SSS PM Paramount Platinum Finish WheelRoaring Toyz OSD Outside Drive Single Chain 300 Single Sided Swingarm Wide Tire Kit

We then added a GSXR 1000 rear tail conversion kit. This kit drops the rider into a pocket and gives the tail a higher and narrow look complimenting the 300 fat tire. It also gives tire to tail section clearance allowing the bike to be lowered more without fear of the larger 18″ rear wheel and tire hitting the bottom of the tail section when the suspension travels!

Custom Suzuki Hayabusa 300 Billet Single Sided Swingarm Paramount WheelsRoaring Toyz 300 Wide Tire Single Sided Billet Swingarm Kit Performance Machine Paramount Platinum Wheels

The entire body was custom painted bright white and a custom wrapped seat was done in red at the customers request. Power was added through a complete Brock’s Performance Exhaust system tuned with a Power Commander 5 while front brake performance was increased with a set of Braking wave rotors and Roaring Toyz white stainless steel brake lines. Black Anodized Billet parts like rearsets, upper triple clamp, grips, clutch & brake levers, mirror block offs. reservoir caps, lowering links, lowering kickstand, fork caps, gas cap, engine covers etc. were bolted up.

This bike really means business and rides incredible with the combination of our OSD [outside drive] swingarm kits which allows a 300 or 330 rear wheel to be run using only one chain offering the best performance, maintenance and reliability available for fat tire bikes. Another HUGE advantage of the OSD is it allows for the use of a short wheelbase not available with jackshaft style set ups. This bike being only 4 inches over stock keeps the bike handling well. The rear drive assembly on our SSS [single sided swingarm] is built to perform and be ridden hard using the best bearings, spindle, splines, radial mount rear brake caliper and cush drive assy.

If you want a great looking custom bike but want a reliable, great handling machine that you can feel comfortable to ride the way a sportbike was intended HARD give us a call and we will build it for you or supply you with the correct products and customer support to make it happen.

Call Roaring Toyz at 941-953-4423 or email brad@roaringtoyz.com


Kodiak 30 Inch Wheel Short Neck Custom Streetglide Stretched Bagger

30 Inch Front Wheel Custom Streetglide Raked Bagger Custom paintHere is another fine example of a bike built using the high end parts we supply for customers! We started out with a 2012 Harley Davidson Electraglide Ultra Classic. The bike was torn down to the frame and we cut the neck off and added our Short Neck 30 Inch front wheel conversion kit. This short neck allows the bike to remain low while keeping suspension travel and less rake offering great steering and ride quality. We added an Xtreme Machine Launch 30″ front wheel  along with our Fiberglass wrap style 30″ front fender.  A raked customer upper fairing was added to correct the headlight angle and a set of Todd’s Ccycle 13″ apehanger handlebars were put on to finish out the front end.

Custom Streetglide 30 Inch Front Wheel Raked BaggerCustom Bagger Raked Short Neck 30 Inch Front Wheel Xtreme Machine Launch

We added a Stretched Gas Tank for better looks along with added fuel capacity to accommodate for long ride. A set of stretched, flared side covers sits in front of the Down’n’Out stretched saddlebags and rear fender finish off the body mods. We then painted the bike with an awesome Black, Candy Metal Flake Red and Metal Flake Silver Scheme to give this bike the Roaring Toyz look!

Streetglide Electraglide Roadglide Stretched Gas Tank Custom Paint30 Inch Streetglide Custom Bagger Paint

A host of other cool goodies were bolted on like our Roaring Toyz Billet Pin Stripe Front Floorboards, Matching Pin Stripe Rear Floorboards, Billet Pin Stripe Clutch and Brake Hand Levers, Pin Stripe Ignition Switch Cover and Custom Grips, No custom bagger is complete without an upgraded stereo system for we added 6.5″ speakers up front, 6×9 speakers in the saddlebags out back and a 300×4 amplifier to crank up the sound. A Roaring Toyz Air Intake, Vance & Hines 2-1 pro pipe with custom extended tip and power commander were put on to boost the 103 engines power. A custom seat and powdercoated misc. parts finish out this cool custom bagger.

Custom 2012 Harley Streetglide Paint Floorboards Air Cleaner BilletCustom Bagger Stretched Saddlebags Rear Fender Ape Hangers

To have a custom bagger built or to source any of these custom parts for your own build give us a call Mon.-Fri. 9-7 at 941-953-4423 or email brad@roaringtoyz.com

Harley Streetglide Custom Bagger 30 Inch Wheel Stretched Saddlebags Tank Fender Upper Fairing30 Inch Front Wheel Custom Bagger Streetglide For Sale Paint Stretched Everything

 


“Minty” Custom Bagger 2010 Streetglide with 30″ Front Wheel Sports Our New Custom Headlight Upper Fairing

Harley Streetglide 30 Inch Front Wheel Air Ride Stretched Bags Tank Fender Upper Fairing Outter HeadlightWhen Robert Barnes first came into our shop a couple years ago he wanted us to trick out his Harley Davidson Streetglide so when he showed up to bike nights and shows he would get attention. At that time 26’s were the big boy wheels and the rest of the custom parts available were a bit tamer than today. He dropped off a deposit and we ordered up parts. Some family problems came up and the project was put on hold. A year and a half later Robert strolled back in the door ready again to make his bike a stand out! Robert had been removed from the bike scene in this time and times had changed. He knew he wanted to surprise his old riding buddies so we sat down and planned out a whole new format for his bike.

Streetglide Custom paint Green Stretched Saddlebags Rear Fender Ipad Inner Upper FairingHarley Streetglide Custom Paint Green Mint 30 Inch Wheel Custom Upper Fairing Nose Sportbike Headlight

We decided to bump the 26″ front wheel and step up to a big 30″ front end conversion kit. We selected the Performance Machine Shock wheel and added dual custom cut to match composite rotors clamped by a set of Chrome Caliper Shells. We attached these components to a set of Chrome Performance Machine Billet Fork Legs covered with matching Chrome Billet Fork Covers. The frame was raked with a short neck rake kit using a trick set of triple trees that are crowned allowing the large 30″ front wheel extra travel while keep the bikes chassis low for that cool look.  Covering up the big 30 inch front tire is our 30 Inch Wrap Front Fender constructed from trick biaxial fiberglass. This fender is more rigid than a steel front fender but lighter, very important on a fender this large as the mounts are a long way from where the fender bolts and other fenders tend to flex too much and rub the tire!

Custom Bagger Saddlebag Speaker Lids with Wheel matching Grills Streetglide Roadglide Roadking ElectraglideHarley Streetglide Electraglide Ipad Inner Fairing Custom Speaker Grills Ape Hanger Handlebars Chrome Billet Ignition Cover CapThe stereo system on this bike has to rock so we planned out a system running 10 speakers with 900 watts of power. A custom 1 Off Creations inner fairing for Ipad Mini and quad speaker saddlebag lids hold 6 Rockford 6 Inch Loud speakers while the inner fairing and bags hold a combo of 4 tweeters to balance the sound. The Ipad Mini sits in front of a Kenwwod head unit that has integration to the stock handlebar controls because having volume and track skipping at your fingertips is a must! We cut custom billet rings to mount wheel matching speaker grills over all the 6 inch speakers for an awesome detailed look!

2010 Custom Harley Streetglide Stretched Rear Fender Saddlebags Model Girls Sexy Green PaintCustom Harley Streetglide Raked 30 Inch Big Wheel Bagger Paint Stretched Upper Tank Saddlebags Fender Side CoversRobert was set on this custom mint green color for paint from day one. We convinced him the bike needed some graphics to break up the green and we went through several renderings before he fell in love! The mint green flake with white pearl graphics was sprayed over an entire custom body. The lead off on this body is our New Custom Headlight Strretglide Upper Fairing. This fairing is built to work with short neck kits allowing space for the extra large wheel to travel up without interference. We use a Kawasaki Z1000 headlight to keep the front narrow and come back with a nice profile more like a sportbike. Give us a call if you like our custom front fairing we now have them in production. In front of the motor sits our custom Steel front chin spoiler. These can be bolted on directly or you can weld them on for a more seamless custom flow. We used the Stretched Look Body Kit tank and flared side covers to give a smooth transition from the gas tank all the way to the stretched down n out saddlebags and rear fender. A custom dash and windshield were added to finish out the body parts.

Chrome Billet Pin Stripe Custom Floorboards Driver Rider Streetglide Roadglide Road King Electraglide Harley TouringRoaring Toyz Billet Custom Chrome Raer Passenger Floorboards Pin Stripe Cut Streetglide Roadglide Road King

Custom Air Cleaner Intake Fast Air Chrome Harley Touring Performance IntakeCustom Streetglide 30 Inch Front Wheel Custom Upper Fairing Headlight Raked Short Neck Trees

No custom bagger is done without adding a ton of detail parts to complete the look. This bike is not done as Robert plans to add many missing accessories. Having said that he chose to run our Roaring Toyz Billet Pin Stripe Custom Floorboards. Our boards front boards are built longer and wider than stock giving more foot room for long rides. We took special attention to cut the design into the bottom side of rear floorboards as they spend more time folded up and look killer with the bottom exposed. Custom foot shift and brake levers were added to compliment our boards. A chrome custom Fast Air performance high flow air filter kit  lets the engine breath.  Robert is now turning heads and winning trophies at the bike shows and is more than happy with the look and ride from this custom Streetglide.

Custom Streetglide Headlight Upper Faring Raked Stetched 30 Inch Wheel Green Paint

We would be happy to build you a custom bagger or to supply you with high quality parts to build you own. Give us a call for parts or questions we are here to help!

Call 941-953-4423

or email brad@roaringtoyz.com

 

Search

Loading

Follow Roaring Toyz

Facebook Twitter 

Blog Topics

Be the first to find out about our Specials, New Products and New Bikes! Just fill in your e-mail address below.