Kawasaki Ninja 1000 and Z1000 Custom Extended Swingarms Now Available

2011-2012-2013-2014-2015-ninja-1000-extended-swingarm-custom

We now have custom stock wheel width extended swingarms available for the 2011-2017 Ninja 1000 and 2010-2017 Z1000 Kawasaki models. The factory rear swingarm on these models used an eccentric style rear axle adjuster making bolt on swingarm extensions impossible while also making an aftermarket swingarm difficult. We Now build this custom bolt on swingarm so you can stretch your ride.

kawsaki-ninja-1000-abs-extended-swingarm-stretched-customkawasaki-ninja-1000-custom-extended-swingarm-2016-2015-2014-2013

Our signature series swingarm comes like all Roaring Toyz swingarms as a direct bolt on fit for the Ninja 1000 and Z 1000 Kawi’s. The swingarm comes with factory style bearings, spacers and circlips installed ready to bolt up and go! The only modification required to install on these models will be the factory rear brake caliper hanger will need a nub cut/ground off for clearance with our new swingarm. This arm will retain use of your factory rear axle which will be carried by our swingarm adjuster blocks located under the nice axle cover plates that come standard on Roaring Toyz Signature Series Swingarms.

custom-extended-swingarm-ninja-1000-z1000-2010-2011-2012kawasaki-z1000-ninja-1000-abs-extended-swingarm-custom

Our swingarm can be built to any length from +2 Over to +20 over with several different options available. Tubular underbracing, stealth underbracing and N.O.S. Bottle brackets are all available for the Kawasaki Ninja 1000 and Z1000 model swingarms. Extended swingarm installation will require a longer extended drive chain, extended rear brake line and lowering links for installation. We do sell all of these components together just call and we can get you set up! This is a link to our Fully Adjustable Lowering Link for the Ninja 1000 and Z1000 models also.

kawasaki-ninja-1000-custom-extended-swingarm-2013kawasaki-z1000-extended-custom-swingarm-2012-2013-2014-2015-2016

All of our custom swingarm are built order and take 2-6 weeks for completion. Give us a call to get yours started toady at 941-953-4423  or email for more info at Robert@roaringtoyz.com


Roaring Toyz Introduces 13” Ape Hanger Handlebars for the Kawasaki Vaquero

SARASOTA, Fla.—Go high or go home. That was the attitude Roaring Toyz boss Robert Fisher had when he created 13-inch ape hanger handlebars for the Kawasaki Vulcan Vaquero 1700.

The new Roaring Toyz ape hangers are the ultimate modification for the 2011-2012 Kawasaki Vulcan Vaquero 1700. Powdercoated black for a mean custom look, the ape hangers bolt directly to the factory risers for easy installation. A gentle bend offers a comfortable riding position as well as plenty of clearance between the bars and the factory inner fairing.

Openings on the bottom of the new Roaring Toyz ape hanger handlebars allow the switch housing wires to run through the interior, creating clean lines and no obstructed views of those black beauties.

Each set of bars is sold as a kit that includes stainless steel extended clutch and brake lines to accommodate the new handlebar length. The only other modification required to fit the new ape hangers is extended switch housing wires. The kits retail for $599.99.

Get your Kawasaki Vulcan Vaquero a little higher with the new Roaring Toyz 13-inch ape hangers. Order online at www.RoaringToyz.com or call (941) 953-4423.

Search

Loading

Follow Roaring Toyz

Facebook Twitter 

Blog Topics

Be the first to find out about our Specials, New Products and New Bikes! Just fill in your e-mail address below.